Kenworth T270
This model has recorded recalls in US, CA but none on file for AU — that may mean it wasn't sold there, or simply hasn't had a recall.
United States
- Kenworth T270date unknownELECTRICAL SYSTEM:IGNITION:SWITCHUS
Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.
- Kenworth T270date unknownSEAT BELTSUS
If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
- Kenworth T270date unknownSEAT BELTSUS
In the event of a crash, the failure in the seat belt anchor may increase the risk of injury.
- Kenworth T270date unknownFUEL SYSTEM, DIESELUS
If the engine stalls unexpectedly there is an increased risk of a crash.
- Kenworth T270date unknownEXTERIOR LIGHTING:TAIL LIGHTSUS
If the stop/tail/turn light is not illuminated, the driver's intentions would not be communicated, which increases the risk of a crash.
- Kenworth T270date unknownEQUIPMENT:ELECTRICALUS
Overheating of the battery separator can result in smoke and possible fire.
- Kenworth T270date unknownSTEERING:LINKAGES:TIE ROD ASSEMBLYUS
If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.
- Kenworth T270date unknownSERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGSUS
Air lines which leak can cause reduced brake function, which may result in a crash.
- Kenworth T270date unknownSERVICE BRAKES, AIR:SUPPLY:CHECK VALVEUS
UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.
- Kenworth T270date unknownWHEELS:HUBUS
Front wheel bearing failure can lead to front wheel separation, increasing the risk of a crash.
- Kenworth T270date unknownVISIBILITY:WINDSHIELD WIPER/WASHER:MOTORUS
As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
- Kenworth T270date unknownPOWER TRAIN:CLUTCH ASSEMBLYUS
Unintended movement of a vehicle can increase the risk of a crash.
- Kenworth T270date unknownSTEERING:CRITICAL FASTENERSUS
Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
- Kenworth T270date unknownSERVICE BRAKES, AIRUS
ALTHOUGH THE OPERATOR IS WARNED OF LOW AIR PRESSURE BY AUDIBLE AND VISUAL LOW AIR PRESSURE WARNING ALARMS, A VEHICLE CRASH OR FIRE IS POSSIBLE IF THESE WARNINGS ARE NOT HEEDED.
- Kenworth T270date unknownFUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAILUS
A fuel leak in the presence of an ignition source increases the risk of a fire.
- Kenworth T270date unknownPOWER TRAIN:AXLE HUBSUS
Bearing failure can cause wheel separation, increasing the risk of crash.
- Kenworth T270date unknownSERVICE BRAKES, AIR:SLACK ADJUSTERSUS
IF THE SLACK ADJUSTER HOUSING WERE TO FRACTURE, THE WHEEL BRAKE TO WHICH THE SLACK ADJUSTER HOUSING IS ATTACHED WOULD NO LONGER FUNCTION, WHICH COULD INCREASE VEHICLE STOPPING DISTANCES, AND IF MOUNTED ON THE STEER AXLE, COULD CAUSE THE VEHICLE TO PULL TO ONE SIDE DURING BRAKING, INCREASING THE RISK OF A CRASH.
- Kenworth T270date unknownELECTRICAL SYSTEM:WIRINGUS
The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.
- Kenworth T270date unknownSERVICE BRAKES, AIR:CONTROLS:FOOT CONTROL/VALVEUS
A separated hose may cause reduced braking ability, increasing the risk of a crash.
- Kenworth T270date unknownFUEL SYSTEM, DIESEL:DELIVERY:HOSES, LINES/PIPING, AND FITTINGSUS
A fuel leak in the presence of an ignition source increases the risk of a fire.
- Kenworth T270date unknownPOWER TRAIN:AXLE ASSEMBLYUS
AN OVER-TORQUE OF THE SPINDLE NUT MAY CAUSE THE BEARING TO SEIZE, POSSIBLY RESULTING IN THE OVERHEATING OF THE WHEEL END. AS A RESULT, A WHEEL END FIRE MAY OCCUR.
- Kenworth T270date unknownELECTRONIC STABILITY CONTROL (ESC)US
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
- Kenworth T270date unknownSTEERINGUS
A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.
- Kenworth T270date unknownFUEL SYSTEM, DIESEL:DELIVERY:HOSES, LINES/PIPING, AND FITTINGSUS
A fuel leak in the presence of an ignition source increases the risk of a fire. An engine stall increases the risk of a crash.
Canada
- Kenworth T2702022-07-28SteeringCA
- Kenworth T2702022-04-25SteeringCA
- Kenworth T2702021-08-03Fuel SystemCA
- Kenworth T2702020-04-07Lights And InstrumentsCA
- Kenworth T2702019-08-16BrakesCA
- Kenworth T2702018-12-24PowertrainCA
- Kenworth T2702018-05-14StructureCA
- Kenworth T2702017-09-25SteeringCA
- Kenworth T2702015-05-08ElectricalCA
- Kenworth T2702014-12-23BrakesCA
- Kenworth T2702014-08-07Fuel SystemCA
- Kenworth T2702014-01-24Seats And RestraintsCA
- Kenworth T2702013-12-05Lights And InstrumentsCA
- Kenworth T2702013-05-24ElectricalCA
- Kenworth T2702012-01-27BrakesCA
- Kenworth T2702011-03-07BrakesCA
- Kenworth T2702010-05-10BrakesCA
- Kenworth T2702009-09-08EmissionsCA
- Kenworth T2702009-04-22BrakesCA
- Kenworth T2702008-06-04Fuel SystemCA
Australia
No recorded recalls for this model in Australia.