IC BUS 3300 COMMERCIAL BUS
- Published
- 2010-06-15
- Model years
- 2005–2010
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS BE COMMERCIAL BUS
- Published
- 2010-06-15
- Model years
- 2008–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS BE SCHOOL BUS
- Published
- 2010-06-15
- Model years
- 2006–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS CE COMMERCIAL BUS
- Published
- 2010-06-15
- Model years
- 2005–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS CE SCHOOL BUS
- Published
- 2010-06-15
- Model years
- 2005–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS HC COMMERCIAL BUS
- Published
- 2010-06-15
- Model years
- 2007–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS RE SCHOOL BUS
- Published
- 2010-06-15
- Model years
- 2005–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →IC BUS SFC COMMERCIAL BUS
- Published
- 2010-06-15
- Model years
- 2005–2006
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →International 1652 SC
- Published
- 2010-06-15
- Model years
- 2005–2007
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →International 3200
- Published
- 2010-06-15
- Model years
- 2004–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →International 4100
- Published
- 2010-06-15
- Model years
- 2006–2008
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →International 4200
- Published
- 2010-06-15
- Model years
- 2003–2010
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →International RXT
- Published
- 2010-06-15
- Model years
- 2006–2007
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →International TSV
- Published
- 2010-06-15
- Model years
- 2009–2009
On certain vehicles equipped with an INTERNATIONAL® VT365 engine, the engine calibration normally responds to a failed open accelerator position sensor circuit fault by returning the engine to low idle speed of 800 rpm and disabling the driver's ability to increase the engine speed. However, If the open circuit condition corrects itself within 30 seconds of its initiation the engine calibration misinterprets this event by going into a "limp home mode" where the
engine speed is increased from low idle speed to the high idle speed of 1200 rpm. This increase to high idle speed may occur without warning causing a sudden and unexpected shift in vehicle position possibly resulting in property damage, personal injury or death. Correction: Dealers will install an updated engine calibration.
View the official source notice →